Werner Almesberger
2016-06-01 03:44:50 UTC
I finally got around to adding the buttons to the case design.
This is the new shape:
Loading Image...
With annotations:
Loading Image...
I also had to grow the case a little bit more. The length is now 55 mm,
up from 54 mm. I hope the buttons will be large enough to feel "good".
They are 8 x 8 mm, a bit smaller than the roughly 9.6 x 10 mm of the
buttons of the modified CR2032 device I use for experiments these days.
The buttons are also slightly vertically off-center with respect to
the display (about 10% of the display height), but that's probably
unnoticeable.
- Werner
_______________________________________________
Qi Hardware Discussion List
Mail to list (members only): ***@lists.en.qi-hardware.com
Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailma
This is the new shape:
Loading Image...
With annotations:
Loading Image...
I also had to grow the case a little bit more. The length is now 55 mm,
up from 54 mm. I hope the buttons will be large enough to feel "good".
They are 8 x 8 mm, a bit smaller than the roughly 9.6 x 10 mm of the
buttons of the modified CR2032 device I use for experiments these days.
The buttons are also slightly vertically off-center with respect to
the display (about 10% of the display height), but that's probably
unnoticeable.
- Werner
_______________________________________________
Qi Hardware Discussion List
Mail to list (members only): ***@lists.en.qi-hardware.com
Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailma